Product ID:SCOTCHCAST 72-NI SPLICING KIT (PART A)
MSDS Date:02/17/1986
FSC:5975
NIIN:01-017-5697
Kit Part:Y
MSDS Number: BGDSW

3M COMPANY- ELECTRICAL PRODUCTS DIVISION

3M CENTER
ST PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Preparer: S

Cage: 75037

SAADY AND HILL ELECTRICAL SUPPLY CO.

24777 RICHMOND, VA 23224-0777 US

Telephone: 804-231-4405

Cage: 58121

METHYLENE BISPHENYL ISOCYANATE (MDI) (SARA III)

CAS: 101-68-8

RTECS: NQ9350000

Fraction By Weight: 45%

OSHA PEL C, 0.02 PPM

ACGIH TLV: 0.005 PPM; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

POLYOL (WT% RANGE 15-25%)

Fraction By Weight: 15%

DIUNDECYL PHTHALATE (WT% RANGE 35-45%)

CAS: 3648-20-2

RTECS: TI1980000

Fraction By Weight: 40%.

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY INDUCE RESPIRATORY SENSITAZATION,
AS THMA-LIKE EPISODES
Effects of Overexposure:EYE: MODERATE IRRITATION. SKN: MODERATE
IRRITATION. INHALE:MILD-MODERATE IRRITANT-MAY INDUCE ASTHMA TYPE
SYMPTOMS. INGEST:MODERATE IRRT, LOW ORAL TOXICITY. NOT: MIXTURE OF
PT A&B MAY CURE ON SKIN IF N OT PROMPTLY REMOVED.
Medical Cond Aggravated by Exposure:AY PREXISTNG ALLERGY OR SENSITIVITY
CONDITION

Flash Point Method:CC
Flash Point:270F/132C
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE FULL BODY PROTECTION AND SCBA PP MODE.
VAPORS, IF RELEASED,ARE IRRITATING AND HIGHLY TOXIC.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:FOLLOW ALL PRECAUTIONS GIVEN.POUR NEUTRALIZING
AGENT OVER SPILL AREA & REACT FOR 10 MIN. IF NEUTRALIZING AGENT NOT
AVAILABLE, USE WATER SUBSTITUTE, REACT FOR 20-30 MIN. COLLECT
W/ABSORBENT, PLACE INCL USABL DRUM.
Neutralizing Agent:MIX: 8% CONC AMMONIA, 2% LIQUID DETERGENT, 90%
WATER.

Handling and Storage Precautions:AVOID EYE/SKIN CONTACT. USE ONLY
W/ADEQUTE VENTILATION, LOCAL EXHAUST PREFERRED. AVOID USE IN
CONFINED SPACES,OTHERWISE USE SCBA PP MODE.

Respiratory Protection:USE SCBA PP MODE IN CONFINED OR POORLY VENTED
AREAS.
Ventilation:LOCAL EXHAUST PREFERRED
Protective Gloves:IMPERVIOUS, AS REQD
Eye Protection:GOGGLES
Other Protective Equipment:FULL SKIN PROTECTION & COVER
Supplemental Safety and Health
PART A OF TWO PART ENCAPSULANT SYSTEM. ENTRY PER 3M MSDS DOC#10-5573-0
DTD 17FEB 86, 3M ID# IS 80-6100-7208-6. ENCAPSULANT (SCOTCHAST
2104) IS CONTAINED IN TWO-COMPARTMENT UNIPAK BAG WEIGHTING 94 GM (
3.3 OZ) AND CONSISTING OF PARTS A&B.KEY01:N1.

HCC:N1
Spec Gravity:1.05
Viscosity:17 P
Solubility in Water:REACTS
Appearance and Odor:GREEN, VISCOUS LIQUID
Percent Volatiles by Volume:0

REACTS W/WATER, ALCOHOL, AMINES
Stability Condition to Avoid:EXCESS HEAT, IGNITION SOURCES
Hazardous Decomposition Products:CARBON & NITROGEN OXIDES, TRACE HCN &
DIPHENYLMETHANE DIISOCYANATE

Waste Disposal Methods:LANDFILL OR INCINERATE IAW ALL LAWS & REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.